Mertik Maxitrol problem
Posted: Thu Oct 09, 2014 8:10 pm
RFXtrx433 can be used to control a fireplace with embedded Mertik Maxitrol remote and receiver.
My fireplace is not receiving commands send with the RFXtrx433. Fireplace will sometimes react to these commands.
Controlling with original remote is no problem.
After some testing with a receiver attached to my oscilloscope it is clear that the timing of the RFXtrx433 is not accurate.
There is a little difference in timing of the orignal remote and the RFXtrx433.
I think this can be solved with a fix or firmware update of the RFXtrx433.
My fireplace is not receiving commands send with the RFXtrx433. Fireplace will sometimes react to these commands.
Controlling with original remote is no problem.
After some testing with a receiver attached to my oscilloscope it is clear that the timing of the RFXtrx433 is not accurate.
There is a little difference in timing of the orignal remote and the RFXtrx433.
I think this can be solved with a fix or firmware update of the RFXtrx433.