toon Start niet door na upgrade naar 5.15.6

If your (rooted) Toon doesn't do what it's supposed to, post here. Dutch allowed / Posten in 't Nederlands toegestaan.

Moderators: marcelr, Toonz, TheHogNL, TerrorSource

toon Start niet door na upgrade naar 5.15.6

Postby sil » Thu Nov 21, 2019 8:01 pm

in verband met problemen met TSC, constant update iedere 15sec., onder versie 5.0.4. heb ik toon voorzien van de 5.15.6 versie, update script gebruikt en alles verliep voorspoedig,na de reboot kwam toon netjes op echter waren niet alle app's bijgewerkt, nadat ik de afval app had bijgewerkt en toon zich opnieuw ging opstarten ging het mis, toon blijft nu hangen in het opstart proces, kan er nog bij komen via SSH, tal van zaken geprobeerd echter zonder resultaat, iemand nog een idee hoe ik verder kan, voordat ik een recover ga doen?
sil
Starting Member
Starting Member
 
Posts: 11
Joined: January 2019

Re: toon Start niet door na upgrade naar 5.15.6

Postby TheHogNL » Thu Nov 21, 2019 8:26 pm

sil wrote:in verband met problemen met TSC, constant update iedere 15sec., onder versie 5.0.4. heb ik toon voorzien van de 5.15.6 versie, update script gebruikt en alles verliep voorspoedig,na de reboot kwam toon netjes op echter waren niet alle app's bijgewerkt, nadat ik de afval app had bijgewerkt en toon zich opnieuw ging opstarten ging het mis, toon blijft nu hangen in het opstart proces, kan er nog bij komen via SSH, tal van zaken geprobeerd echter zonder resultaat, iemand nog een idee hoe ik verder kan, voordat ik een recover ga doen?


Kan je de afval app eens verwijderen? (de wastecollection directories in /qmf/qml/apps verwijderen). Hier ook iemand die problemen heeft ermee en na verwijderen het wel werkt: https://www.domoticaforum.eu/viewtopic. ... =15#p92611
Member of the Toon Software Collective
User avatar
TheHogNL
Forum Moderator
Forum Moderator
 
Posts: 1558
Joined: August 2017

Re: toon Start niet door na upgrade naar 5.15.6

Postby sil » Thu Nov 21, 2019 10:39 pm

heb de app's verwijderd welke niet direct nodig zijn ook de afval app. toon blijft hangen naar reboot
sil
Starting Member
Starting Member
 
Posts: 11
Joined: January 2019

Re: toon Start niet door na upgrade naar 5.15.6

Postby sil » Thu Nov 21, 2019 10:40 pm

TheHogNL wrote:
sil wrote:in verband met problemen met TSC, constant update iedere 15sec., onder versie 5.0.4. heb ik toon voorzien van de 5.15.6 versie, update script gebruikt en alles verliep voorspoedig,na de reboot kwam toon netjes op echter waren niet alle app's bijgewerkt, nadat ik de afval app had bijgewerkt en toon zich opnieuw ging opstarten ging het mis, toon blijft nu hangen in het opstart proces, kan er nog bij komen via SSH, tal van zaken geprobeerd echter zonder resultaat, iemand nog een idee hoe ik verder kan, voordat ik een recover ga doen?


Kan je de afval app eens verwijderen? (de wastecollection directories in /qmf/qml/apps verwijderen). Hier ook iemand die problemen heeft ermee en na verwijderen het wel werkt: https://www.domoticaforum.eu/viewtopic. ... =15#p92611


heb de app's verwijderd incl. de afval app echter zonder resultaat, is er een optie om de laatste versie opnieuw te installeren?
sil
Starting Member
Starting Member
 
Posts: 11
Joined: January 2019

Re: toon Start niet door na upgrade naar 5.15.6

Postby mAiden » Fri Nov 22, 2019 9:55 am

Zal je de volgende commando eens willen uitvoeren in SSH

Code: Select all
vi /etc/inittab


Mocht dit onderstaande weergeven, dan is je inittab beschadigd, dan hoor ik dat graag zodat ik of iemand er een kan posten voor je.

Code: Select all
~~~~~~~~~~
mAiden
Member
Member
 
Posts: 287
Joined: July 2017

Re: toon Start niet door na upgrade naar 5.15.6

Postby michel30 » Fri Nov 22, 2019 10:01 am

Heb je de Toon ook is helemaal van de stroom gehaald?

Welke foutmelding zie je op de display of loopt de balk niet verder?
Aangezien die wel opgestart is geweest kan het niet veel zijn.

Heb je ook al eens in de log file gekeken?
michel30
Member
Member
 
Posts: 249
Joined: August 2017

Re: toon Start niet door na upgrade naar 5.15.6

Postby sil » Fri Nov 22, 2019 10:43 am

dit is het resultaat van, vi /etc/inittab, toon al diverse keren van stroom gehaald, balkje loopt niet verder, blijft op ongeveer een derde hangen

/etc/inittab: init(8) configuration.
# $Id: inittab,v 1.91 2002/01/25 13:35:21 miquels Exp $

# The default runlevel.
id:5:initdefault:

# Boot-time system configuration/initialization script.
# This is run first except when booting in emergency (-b) mode.
si::sysinit:/etc/init.d/rcS

# What to do in single-user mode.

# /etc/init.d executes the S and K scripts upon change
# of runlevel.
#
# Runlevel 0 is halt.
# Runlevel 1 is single-user.
# Runlevels 2-5 are multi-user.
# Runlevel 6 is reboot.

l0:0:wait:/etc/init.d/rc 0
l1:1:wait:/etc/init.d/rc 1
l2:2:wait:/etc/init.d/rc 2
l3:3:wait:/etc/init.d/rc 3
l4:4:wait:/etc/init.d/rc 4
l5:5:wait:/etc/init.d/rc 5
l6:6:wait:/etc/init.d/rc 6
# Normally not reached, but fallthrough in case of emergency.
z6:6:respawn:/sbin/sulogin

# HCBv2 static stuff
#ovpn:235:respawn:/usr/sbin/openvpn --config /etc/openvpn/vpn.conf --verb 0 >/dev/null 2>&1
qtqt:245:respawn:/usr/bin/startqt >/dev/null 2>&1
# add serial console access:
gett:235:respawn:/sbin/getty -L 115200 ttymxc0 vt102
tscs:245:respawn:/usr/bin/tsc >/var/log/tsc 2>&1

# WARNING: auto-managed by '/etc/init.d/HCBv2 inittabwrap' with '/HCBv2/etc/start.d/*'
# lines containing 'inittabwrap' will be removed automagically.
netc:235:respawn:/etc/init.d/HCBv2 inittabwrap hcb_netcon
comm:345:respawn:/etc/init.d/HCBv2 inittabwrap hcb_comm
even:345:respawn:/etc/init.d/HCBv2 inittabwrap happ_eventmgr
pwru:345:respawn:/etc/init.d/HCBv2 inittabwrap happ_pwrusage
scsy:345:respawn:/etc/init.d/HCBv2 inittabwrap happ_scsync
smar:345:respawn:/etc/init.d/HCBv2 inittabwrap happ_smartplug
ther:345:respawn:/etc/init.d/HCBv2 inittabwrap happ_thermstat
- /etc/inittab 1/58 1%
sil
Starting Member
Starting Member
 
Posts: 11
Joined: January 2019

Re: toon Start niet door na upgrade naar 5.15.6

Postby mAiden » Fri Nov 22, 2019 12:35 pm

Aangezien je aangaf dat Toon niet doorstartte, gingen mij eerste gedachtens uit naar een corrupte inittab.
Maar aangezien deze er gewoon in staat, gaat het mis in de QT.
Zou je onderstaande code eens willen uitvoeren?

Code: Select all
sed -i 's#startqt >/dev/null#startqt >/var/log/qt#' /etc/inittab  ; init q ; killall -9 qt-gui


Dit zal alle QT logging naar /var/log/qt zetten. Deze log zou ik graag is even zien, hier op het forum.. Let er wel op zodra je probleem is opgelost, dat je deze weer aanpast met onderstaande code:

Code: Select all
sed -i 's#startqt >/var/log/qt#startqt >/dev/null#' /etc/inittab  ; init q ; killall -9 qt-gui


Dankjewel TheHogNL voor de sed code. ;)
mAiden
Member
Member
 
Posts: 287
Joined: July 2017

Re: toon Start niet door na upgrade naar 5.15.6

Postby sil » Fri Nov 22, 2019 12:54 pm

heb het volgende nog geprobeerd

sh update-rooted.sh -v 5.15.6
===================================================================================================================================================================
Welcome to the rooted Toon upgrade script. This script will try to upgrade your Toon using your original connection with Eneco. It will start the VPN if necessary.
Please be advised that running this script is at your own risk!

Version: 4.07 - TheHogNL & TerrorSource & yjb - 20-11-2019

If you like the update script for rooted toons you can support me. Any donation is welcome and helps me developing the script even more.
https://paypal.me/pools/c/8bU3eQp1Jt

===================================================================================================================================================================

Forcing version: 5.15.6
There is no base file installed? Try to get flavour from ready to install files.
Could not determine you current running flavour.
DEBUG:
base-files - 3.0.14-r100
base-passwd - 3.5.20-r1
Quitting the upgrade. It was a nice try tho...
killall: openvpn: no process killed
sil
Starting Member
Starting Member
 
Posts: 11
Joined: January 2019

Re: toon Start niet door na upgrade naar 5.15.6

Postby TheHogNL » Fri Nov 22, 2019 1:36 pm

je mist wat belangrijke bestanden, voer dit even uit:

Code: Select all
curl -Nks https://raw.githubusercontent.com/ToonSoftwareCollective/update-rooted/master/update-rooted.sh -o /root/update-rooted.sh
sh /root/update-rooted.sh -o
opkg update
opkg remove --force-depends base-qb2-uni qmf-release
opkg install  base-qb2-uni qmf-release
Member of the Toon Software Collective
User avatar
TheHogNL
Forum Moderator
Forum Moderator
 
Posts: 1558
Joined: August 2017

Re: toon Start niet door na upgrade naar 5.15.6

Postby sil » Fri Nov 22, 2019 1:38 pm

sed -i 's#startqt >/dev/null#startqt >/var/log/qt#' /etc/inittab ; init q ; killall -9 q
t-gui
killall: qt-gui: no process killed
eneco-001-292428:~#

resultaat:/bin/sh: exec: line 1: /usr/bin/startqt: not found
sil
Starting Member
Starting Member
 
Posts: 11
Joined: January 2019

Re: toon Start niet door na upgrade naar 5.15.6

Postby mAiden » Fri Nov 22, 2019 1:45 pm

sil wrote:sed -i 's#startqt >/dev/null#startqt >/var/log/qt#' /etc/inittab ; init q ; killall -9 q
t-gui
killall: qt-gui: no process killed
eneco-001-292428:~#

resultaat:/bin/sh: exec: line 1: /usr/bin/startqt: not found


Kijk even naar TheHogNL zijn reactie, dat is de reden waarom startqt niet werkt :)

TheHogNL wrote:je mist wat belangrijke bestanden, voer dit even uit:

Code: Select all
curl -Nks https://raw.githubusercontent.com/ToonSoftwareCollective/update-rooted/master/update-rooted.sh -o /root/update-rooted.sh
sh /root/update-rooted.sh -o
opkg update
opkg remove --force-depends base-qb2-uni qmf-release
opkg install  base-qb2-uni qmf-release
mAiden
Member
Member
 
Posts: 287
Joined: July 2017

Re: toon Start niet door na upgrade naar 5.15.6

Postby sil » Fri Nov 22, 2019 1:56 pm

heb gevraagde opdrachten uitgevoerd met volgende resultaat:

eneco-001-292428:~# curl -Nks https://raw.githubusercontent.com/ToonS ... d/master/u
pdate-rooted.sh -o /root/update-rooted.sh
eneco-001-292428:~# sh /root/update-rooted.sh -o
===================================================================================================================================================================
Welcome to the rooted Toon upgrade script. This script will try to upgrade your Toon using your original connection with Eneco. It will start the VPN if necessary.
Please be advised that running this script is at your own risk!

Version: 4.07 - TheHogNL & TerrorSource & yjb - 20-11-2019

If you like the update script for rooted toons you can support me. Any donation is welcome and helps me developing the script even more.
https://paypal.me/pools/c/8bU3eQp1Jt

===================================================================================================================================================================

Only start VPN and then quit
There is no base file installed? Try to get flavour from ready to install files.
Could not determine you current running flavour.
DEBUG:
base-files - 3.0.14-r100
base-passwd - 3.5.20-r1
Quitting the upgrade. It was a nice try tho...
killall: openvpn: no process killed
eneco-001-292428:~# opkg update
Downloading http://feed.hae.int/feeds/qb2/uni/5.15.6/Packages.gz.
Downloading http://feed.hae.int/feeds/qb2/uni/5.15.6/Packages.sig.
Signature check failed.
Remove wrong Signature file.
Downloading http://feed.hae.int/feeds/qb2/oe/angeli ... ackages.gz.
Downloading http://feed.hae.int/feeds/qb2/oe/angeli ... ckages.sig.
Signature check failed.
Remove wrong Signature file.
Downloading http://feed.hae.int/feeds/qb2/oe/angeli ... ackages.gz.
Downloading http://feed.hae.int/feeds/qb2/oe/angeli ... ckages.sig.
Signature check failed.
Remove wrong Signature file.
Downloading http://feed.hae.int/feeds/qb2/oe/angeli ... ackages.gz.
Downloading http://feed.hae.int/feeds/qb2/oe/angeli ... ckages.sig.
Signature check failed.
Remove wrong Signature file.
Downloading http://feed.hae.int/feeds/qb2/oe/angeli ... ackages.gz.
Downloading http://feed.hae.int/feeds/qb2/oe/angeli ... ckages.sig.
Signature check failed.
Remove wrong Signature file.
Downloading http://feed.hae.int/feeds/qb2/oe/angeli ... ackages.gz.
Downloading http://feed.hae.int/feeds/qb2/oe/angeli ... ckages.sig.
Signature check failed.
Remove wrong Signature file.
Collected errors:
* opkg_download: Failed to download http://feed.hae.int/feeds/qb2/uni/5.15.6/Packages.gz: HTTP response code said error.
* opkg_download: Failed to download http://feed.hae.int/feeds/qb2/uni/5.15.6/Packages.sig: HTTP response code said error.
* opkg_download: Failed to download http://feed.hae.int/feeds/qb2/oe/angeli ... ackages.gz: HTTP response code said error.
* opkg_download: Failed to download http://feed.hae.int/feeds/qb2/oe/angeli ... ckages.sig: HTTP response code said error.
* opkg_download: Failed to download http://feed.hae.int/feeds/qb2/oe/angeli ... ackages.gz: HTTP response code said error.
* opkg_download: Failed to download http://feed.hae.int/feeds/qb2/oe/angeli ... ckages.sig: HTTP response code said error.
* opkg_download: Failed to download http://feed.hae.int/feeds/qb2/oe/angeli ... ackages.gz: HTTP response code said error.
* opkg_download: Failed to download http://feed.hae.int/feeds/qb2/oe/angeli ... ckages.sig: HTTP response code said error.
* opkg_download: Failed to download http://feed.hae.int/feeds/qb2/oe/angeli ... ackages.gz: HTTP response code said error.
* opkg_download: Failed to download http://feed.hae.int/feeds/qb2/oe/angeli ... ckages.sig: HTTP response code said error.
* opkg_download: Failed to download http://feed.hae.int/feeds/qb2/oe/angeli ... ackages.gz: HTTP response code said error.
* opkg_download: Failed to download http://feed.hae.int/feeds/qb2/oe/angeli ... ckages.sig: HTTP response code said error.
eneco-001-292428:~# opkg remove --force-depends base-qb2-uni qmf-release
No packages removed.
eneco-001-292428:~# opkg install base-qb2-uni qmf-release
Unknown package 'base-qb2-uni'.
Unknown package 'qmf-release'.
Collected errors:
* opkg_install_cmd: Cannot install package base-qb2-uni.
* opkg_install_cmd: Cannot install package qmf-release.
eneco-001-292428:~#
sil
Starting Member
Starting Member
 
Posts: 11
Joined: January 2019

Re: toon Start niet door na upgrade naar 5.15.6

Postby TheHogNL » Fri Nov 22, 2019 2:02 pm

Ok doe dan het volgende even:

Code: Select all
/usr/sbin/openvpn --config /etc/openvpn/vpn.conf &
opkg update
opkg remove --force-depends base-qb2-uni qmf-release
opkg install  base-qb2-uni qmf-release


en als dat er goed uit ziet

Code: Select all
killall -9 openvpn
sh /root/update-rooted.sh -f


Daarna reboot
Member of the Toon Software Collective
User avatar
TheHogNL
Forum Moderator
Forum Moderator
 
Posts: 1558
Joined: August 2017

Re: toon Start niet door na upgrade naar 5.15.6

Postby sil » Fri Nov 22, 2019 2:49 pm

uitgevoerd helaas zelfde probleem, heb toon na de reboot ook nog van spanning gehaald.

eneco-001-292428:~# /usr/sbin/openvpn --config /etc/openvpn/vpn.conf &
eneco-001-292428:~# opkg update
Fri Nov 22 13:26:41 2019 DEPRECATED OPTION: --tls-remote, please update your configuration
Fri Nov 22 13:26:41 2019 OpenVPN 2.3.11 arm-hae-linux-gnueabi [SSL (OpenSSL)] [LZO] [EPOLL] [MH] [IPv6] built on Nov 30 2016
Fri Nov 22 13:26:41 2019 library versions: OpenSSL 1.0.2h 3 May 2016, LZO 1.08
Fri Nov 22 13:26:41 2019 Control Channel Authentication: using '/etc/openvpn/vpn/ta.key' as a OpenVPN static key file
Fri Nov 22 13:26:42 2019 Attempting to establish TCP connection with [AF_INET]52.213.125.228:443 [nonblock]
Downloading http://feed.hae.int/feeds/qb2/uni/5.15.6/Packages.gz.
Downloading http://feed.hae.int/feeds/qb2/uni/5.15.6/Packages.sig.
Signature check failed.
Remove wrong Signature file.
Downloading http://feed.hae.int/feeds/qb2/oe/angeli ... hg64/Packa ges.gz.
Downloading http://feed.hae.int/feeds/qb2/oe/angeli ... hg64/Packa ges.sig.
Signature check failed.
Remove wrong Signature file.
Downloading http://feed.hae.int/feeds/qb2/oe/angeli ... sh2/Packag es.gz.
Downloading http://feed.hae.int/feeds/qb2/oe/angeli ... sh2/Packag es.sig.
Signature check failed.
Remove wrong Signature file.
Downloading http://feed.hae.int/feeds/qb2/oe/angeli ... ackages.gz.
Downloading http://feed.hae.int/feeds/qb2/oe/angeli ... ckages.sig.
Signature check failed.
Remove wrong Signature file.
Downloading http://feed.hae.int/feeds/qb2/oe/angeli ... ackages.gz.
Downloading http://feed.hae.int/feeds/qb2/oe/angeli ... ckages.sig.
Signature check failed.
Remove wrong Signature file.
Downloading http://feed.hae.int/feeds/qb2/oe/angeli ... ackages.gz.
Downloading http://feed.hae.int/feeds/qb2/oe/angeli ... ckages.sig.
Signature check failed.
Remove wrong Signature file.
Collected errors:
* opkg_download: Failed to download http://feed.hae.int/feeds/qb2/uni/5.15.6/Packages.gz: HTTP response code said error.
* opkg_download: Failed to download http://feed.hae.int/feeds/qb2/uni/5.15.6/Packages.sig: HTTP response cod e said error.
* opkg_download: Failed to download http://feed.hae.int/feeds/qb2/oe/angeli ... abel/2.6.3 6-R10-h28-cmpxchg64/Packages.gz: HTTP response code said error.
* opkg_download: Failed to download http://feed.hae.int/feeds/qb2/oe/angeli ... abel/2.6.3 6-R10-h28-cmpxchg64/Packages.sig: HTTP response code said error.
* opkg_download: Failed to download http://feed.hae.int/feeds/qb2/oe/angeli ... abel/2.6.3 6-base-r17-splash2/Packages.gz: HTTP response code said error.
* opkg_download: Failed to download http://feed.hae.int/feeds/qb2/oe/angeli ... abel/2.6.3 6-base-r17-splash2/Packages.sig: HTTP response code said error.
* opkg_download: Failed to download http://feed.hae.int/feeds/qb2/oe/angeli ... abel/all/P ackages.gz: HTTP response code said error.
* opkg_download: Failed to download http://feed.hae.int/feeds/qb2/oe/angeli ... abel/all/P ackages.sig: HTTP response code said error.
* opkg_download: Failed to download http://feed.hae.int/feeds/qb2/oe/angeli ... abel/armv5 e/Packages.gz: HTTP response code said error.
* opkg_download: Failed to download http://feed.hae.int/feeds/qb2/oe/angeli ... abel/armv5 e/Packages.sig: HTTP response code said error.
* opkg_download: Failed to download http://feed.hae.int/feeds/qb2/oe/angeli ... abel/quby2 /Packages.gz: HTTP response code said error.
* opkg_download: Failed to download http://feed.hae.int/feeds/qb2/oe/angeli ... abel/quby2 /Packages.sig: HTTP response code said error.
eneco-001-292428:~# opkg remove --force-depends base-qb2-uni qmf-release
No packages removed.
eneco-001-292428:~# opkg install base-qb2-uni qmf-releaseFri Nov 22 13:26:43 2019 TCP connection established with [AF_INET]52.213.125.228:443
Fri Nov 22 13:26:43 2019 TCPv4_CLIENT link local: [undef]
Fri Nov 22 13:26:43 2019 TCPv4_CLIENT link remote: [AF_INET]52.213.125.228:443
Fri Nov 22 13:26:44 2019 [VPN-Eneco] Peer Connection Initiated with [AF_INET]52.213.125.228:443
Fri Nov 22 13:26:46 2019 TUN/TAP device tap0 opened
Fri Nov 22 13:26:46 2019 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Fri Nov 22 13:26:46 2019 /sbin/ifconfig tap0 172.21.90.72 netmask 255.255.240.0 mtu 1500 broadcast 172.21.95. 255
Fri Nov 22 13:26:46 2019 Initialization Sequence Completed
eneco-001-292428:~# opkg install base-qb2-uni qmf-release
Unknown package 'base-qb2-uni'.
Unknown package 'qmf-release'.
Collected errors:
* opkg_install_cmd: Cannot install package base-qb2-uni.
* opkg_install_cmd: Cannot install package qmf-release.
eneco-001-292428:~# killall -9 openvpn
eneco-001-292428:~# sh /root/update-rooted.sh -f
===================================================================================================================================================================
Welcome to the rooted Toon upgrade script. This script will try to upgrade your Toon using your original connection with Eneco. It will start the VPN if necessary.
Please be advised that running this script is at your own risk!

Version: 4.07 - TheHogNL & TerrorSource & yjb - 20-11-2019

If you like the update script for rooted toons you can support me. Any donation is welcome and helps me developing the script even more.
https://paypal.me/pools/c/8bU3eQp1Jt

===================================================================================================================================================================

Only fixing files.
creating backup of inittab...
creating backup of chrony.conf...
creating backup of hosts...
creating backup of config_happ_scsync.xml...
creating backup of qmf_tenant.xml.save ...
mkdir: can't create directory '/root/backup_files/': File exists
sh: 4: unknown operand
sh: 4: unknown operand
FIXING: Trying to fix Global.qml now to add all the Toonstore installed apps again.
grep: /qmf/qml/qb/base/Globals.qml: No such file or directory
Restoring tsctoonmobile in Globals.qml
sed: /qmf/qml/qb/base/Globals.qml: No such file or directory
grep: /qmf/qml/qb/base/Globals.qml: No such file or directory
Restoring fileinfo in Globals.qml
sed: /qmf/qml/qb/base/Globals.qml: No such file or directory
grep: /qmf/qml/qb/base/Globals.qml: No such file or directory
Restoring mysolar in Globals.qml
sed: /qmf/qml/qb/base/Globals.qml: No such file or directory
grep: /qmf/qml/qb/base/Globals.qml: No such file or directory
Restoring wastecollection in Globals.qml
sed: /qmf/qml/qb/base/Globals.qml: No such file or directory
grep: /qmf/qml/qb/base/Globals.qml: No such file or directory
Restoring toonstore in Globals.qml
sed: /qmf/qml/qb/base/Globals.qml: No such file or directory
FIXING: Now fixing internet settings app to fake ST_TUNNEL mode.
grep: /HCBv2/qml/apps/internetSettings/InternetSettingsApp.qml: No such file or directory
Modification in InternetSettingsApp.qml is missing. Fixing it now.
sed: /HCBv2/qml/apps/internetSettings/InternetSettingsApp.qml: No such file or directory
FIXING: Now modifying notifications bar to not show any network errors
grep: /qmf/qml/qb/notifications/NotificationBar.qml: No such file or directory
Modification in NotificationBar.qml is missing. Fixing it now.
sed: /qmf/qml/qb/notifications/NotificationBar.qml: No such file or directory
sh: 4: unknown operand
EDITING: Time server, removes unnecessary link to Quby
EDITING: Hosts file, removes unnecessary link to Quby
EDITING: disable ovpn connection to quby
EDITING: Activating Toon, enabling ElectricityDisplay and GasDisplay
EDITING: removing data gathering by Quby and whitelisting web services
sed: /HCBv2/etc/qmf_release.xml: No such file or directory
EDITING: disabling Eneco subscription feature apps to free up memory on this toon 1
EDITING: disabling KPI and weather happ as these are not necessary on rooted toons
sed: /HCBv2/etc/qmf_hardware.xml: No such file or directory
sed: /HCBv2/etc/qmf_hardware.xml: No such file or directory
EDITING: disabling samba nmbd on toon 1 as probably it is not necessary
File /mnt/data/qmf/config/config_happ_scsync.xml was modified but result is an empty file! Trying to restore!
cp: can't stat '/mnt/data/qmf/config/config_happ_scsync.xml.save': No such file or directory
Restore of /mnt/data/qmf/config/config_happ_scsync.xml is failed! Result is also empty! Please check this file before rebooting!
File /HCBv2/etc/qmf_tenant.xml was modified but result is an empty file! Trying to restore!
Restore of /HCBv2/etc/qmf_tenant.xml is failed! Result is also empty! Please check this file before rebooting!
[1]+ Killed /usr/sbin/openvpn --config /etc/openvpn/vpn.conf
eneco-001-292428:~# reboot
WARNING: could not determine runlevel - doing soft reboot
(it's better to use shutdown instead of reboot from the command line)

Broadcast message from root (pts/0) (Fri Nov 22 13:28:49 2019):

The system is going down for reboot NOW!
eneco-001-292428:~#
sil
Starting Member
Starting Member
 
Posts: 11
Joined: January 2019

Next

Return to Toon issues and support (Nederlands toegestaan)

Who is online

Users browsing this forum: No registered users and 1 guest