Cable length from AD10 to momentairy switch

Post by **Droezel** » Thu Aug 16, 2007 9:59 am

Hello,

We're installing AD10 modules in our wiring closet. Most of them work fine, but one is giving troubles. When we connect a short cable (2 meters) to the momentairy switch everything works fine. But when the cable grows longer (10+ meters), the AD10 module doesn't respond any more.

We've replaced the cables, unplugged all electrical equipment but it's still not working with the longer cable. Any ideas?

Post by **Han** » Sat Aug 18, 2007 4:00 pm

Hi,
Might be the same kind of problem as http://www.domoticaforum.eu/topic.asp?TOPIC_ID=402

Han Alink

Post by **Droezel** » Sun Aug 19, 2007 1:53 pm

The AD-10 module works perfect with x10 commands, only the attached switch in the wall does not work when the cable becomes too long. We'll be trying other cabling and see what the result is. A lot of work because all cabling is in place already...

Post by **Droezel** » Sun Sep 02, 2007 5:30 pm

Just an update: Changing cables did the trick, all AD-10 modules are now working with the inwall switches.

Post by **Niknik** » Mon Sep 03, 2007 10:58 am

Can you please post what kind of cables was causing problems, and what cables worked fine?
(Just so it can help someone having the same problem)