USB lan hub

Post by **Herbus** » Sun Nov 15, 2009 1:42 am

My Xanura installation is growing and I really need to move my PMIX35 to the transformer substation (meterkast). Because my server and ups are in the basement I need a USB lan hub.
Homeseer
win xp
pmix35

Which USB lan hub is working fine with the PMIX35 and HS?
On the board I see a lot of the Belkin, does this one fits my needs?

Herbus (Jos)

Post by **TANE** » Sun Nov 15, 2009 1:52 am

Jos,
I did never trust the Belkin for using with the PMIX35.
You need a stable connection for the PMIX35 plugin..ones broken it will never startup again.

It did work fine with Plugwise since plugwise will reconnect.

For me The best lan USB hub is USBAnywhere
http://www.digi.com/products/usb/anywhe ... p#overview
Biggest problem is the price..

<hr noshade size="1">Enver
Twitter http://twitter.com/Chak64%20My%20Domoti ... tane.nl/wp

Post by **Rene** » Sun Nov 15, 2009 1:15 pm

Since the last version the Plugwise Source crashes when the connection to the USB stick is lost while before it would reconnect.

Rene.

Post by **Francois** » Sun Nov 15, 2009 6:02 pm

Jos,

I do not have the same thought about PIMX35 and the Belkin hub. I am running this combination now for over a year, have not experienced any problems what so ever in relation to the Belkin hub.

FYI: I am running the belkin hub with 3 devices connected: PIMX35 via USB, RFXCOM transmitter via USB and a Digigbee boards also via USB. All device are connected to my virtual (Hyper-V based) Homeseer server. Before I got the PIMX35 I used to run a CM10 from marmitek with a USB to RS232 convertor, also no problems.

Francois

Post by **Digit** » Sun Nov 15, 2009 6:12 pm

I would first try the Belkin, i have one also and it works perfectly, no problems at all for almost a year now.
The AnywhereUSB works very good too, i have tested it for a short while; it looks more professional compared to the Belkin.
However the price difference with a AnywhereUSB is rather large so i would first try the Belkin, can save you a lot of $$$.

<hr noshade size="1">Robert
http://www.hekkers.net Digit's Online Home.

Post by **Bwired** » Sun Nov 15, 2009 6:24 pm

Same here Belkin works fine for me on W2K3 Server, there are different driver to try as well
check my blog at http://www.bwired.nl/weblog.asp?id=335

<hr noshade size="1">Pieter Knuvers
http://www.bwired.nl Online House in the netherlands. Domotica, Home Automation.

Post by **Edwin2008** » Sun Nov 15, 2009 11:53 pm

Funny thing is that with the belkin software en Firmwareversion 1.2.0 it runs quit stable on WXP-Pro SP3 but when i use the Silex SX-1000u driver package v4.5.0 it keeps on disconnecting. Anyone the same experience? I saw on the silex site also a firmware upgrade to 132.401 but i'm not sure if this would transfer the belkin in a book-support system

Post by **Rene** » Mon Nov 16, 2009 12:25 am

Yep, same experience here with the Silex driver.

Rene.

Post by **Edwin2008** » Mon Nov 16, 2009 10:11 am

thanks, anyone else?

Post by **Herbus** » Mon Nov 16, 2009 9:41 pm

Thanks for the replies. I think I found a more reliable solution:
Its possible to get a CAT5 wire between my transformer substation (meterkast) and my domotica server. The distance is about 13 meters.
When Im able to connect the PMIX35 with this connection its always on and not depending on my network.
I found that USB can be extended up to 5 meters. For longer distances you need USB-UTP extenders.
Any experiences with this kind of extenders?

Herbus (Jos)

Post by **Droezel** » Wed Nov 18, 2009 7:03 pm

We tried the belkin's at work but the proved unstable (disconnects etc...). We're using lantronix devices now, they work like a charm. Very stable! http://www.lantronix.com/device-network ... /ubox.html

Post by **LostDreamer** » Wed Nov 18, 2009 7:27 pm

I've been using the USB extenders for about 2 years now, running up to 30m.
As long as the receiving end uses it's own power adapter, it's very stable (not one drop out in these 2 years.

The receiving end has a USB hub with both a USB Soundcard with mic and speakers and a USB Wireless PC Lock.
Both are working perfectly.
I wouldn't hesitate with buying these devices when needed.

Regards,
LostDreamer

ps: This version: http://www.hardware.info/nl-NL/News/ynC ... BExtender/

Post by **Herbus** » Wed Nov 18, 2009 9:38 pm

Yesterday I ordered a Aten USB extender. I will pick it up tomorrow.
Glad to read that this was a good choice! Thanks.

Herbus (Jos)

Post by **DJF3** » Sat Nov 21, 2009 7:29 pm

I also have some links for the Belkin LAN USB connected to the Win2k Server VMware machine
http://www.domoticaworld.com
click on 'BT Presence' link under 'Projects'
Cheers
DJ