X10 clicks. removing them

Post by **Snelvuur** » Sun Dec 30, 2007 7:09 pm

Dont know if someone here has devices which "click" if you turn them on or off..

http://idobartana.com/hakb/SSR/silentsw.html

this guy has a way of getting rid of that.

// Erik (binkey.nl)

Post by **Peterpc** » Mon Dec 31, 2007 1:04 am

The Marmitek AM12 module gives a hard click because it has a special relay, that can remember the last state when you have a power down.

When you want a "silent" module, you can use the TM13. It is very hard to hear when it switches. It does not remember the last state when power goes down and has only 1 unit code, but the price is the same as a AM12. It also supports status request.

Post by **Bwired** » Mon Dec 31, 2007 1:22 am

And it can receive RF and puts it's on the powerline

Post by **Mhwlng** » Mon Dec 31, 2007 10:45 am

these wall switches also have a civilized click sound level...

the UIX2210E

http://www.uiitec.com/shop3/xiangxi.asp?cpid=89 (relay, not dimmer. description is wrong)

they are sold here (dutch)

http://www.mypowershop.eu

x10 home automation ->
special design wandschakelelaars ->
Schakelaar Spaarlamp/Neon 5521

I use this switch to control 4 LED lights from ...

(dutch)

http://www.leditlight.net/?menu=article ... ID=1274369

Marcel

Post by **Peterpc** » Wed Jan 02, 2008 11:40 pm

<i>And it can receive RF and puts it's on the powerline

</i>
It can even receive all housecodes on housecode "P"

Post by **Bwired** » Thu Jan 03, 2008 12:13 am

you are right, and only for one Housecode.

Post by **Peterpc** » Thu Jan 03, 2008 10:23 pm

When TM13 is at housecode P, it will convert all RF house/unit codes to PLC signals. A trough P!