Custom Infrared Codes

Post by **Cariba** » Wed Mar 11, 2009 8:59 pm

I have a WinLIRC (IR Receiver) compatible device attached to my PC.

Now I want to generate custom IR command with a small amount (e.g. device address) of data embedded in the IR signal to be received by the PC.

Anyone got any suggestions on encoding (for instance) a value of 0x8038BDF5 to an IR signal. I would need a Pronto Hex code as a result value.

Does anyone has some suggestions on how to accomplish this?

Post by **TANE** » Wed Mar 11, 2009 10:37 pm

on the next url look voor HEX converter..Maybe you can create the codes you want using this tool.

http://www.hifi-remote.com/sony/Sony_rcvr.htm

Post by **RdP** » Wed Mar 11, 2009 11:12 pm

Look at http://www.remotecentral.com, here is lots of info about all kinds of remotes and IR codes to find....

Post by **Cariba** » Wed Mar 11, 2009 11:18 pm

<blockquote id="quote">quote:<hr height="1" noshade id="quote"> on the next url look voor HEX converter..Maybe you can create the codes you want using this tool.

http://www.hifi-remote.com/sony/Sony_rcvr.htm
<hr height="1" noshade id="quote"></blockquote id="quote">
There is no hex converter there...

<blockquote id="quote">quote:<hr height="1" noshade id="quote">
Look at http://www.remotecentral.com, here is lots of info about all kinds of remotes and IR codes to find....
<hr height="1" noshade id="quote"></blockquote id="quote">

Yeah I already looked at that page but I couldn't find what I was looking for. I might end up coding something myself or using existing codes for a different purpose...

Post by **TANE** » Wed Mar 11, 2009 11:46 pm

sorry it's called makehex (download form remotecentral)

http://www.hifi-remote.com/sony/Sony_pronto.htm