I intend to install a few of these cameras for surveillance and security purposes (that is: to record images in case of any alarm, not to replace a true security system). This model features some nice extras: a passive infrared sensor (PIR), and input and output ports allowing connectivity to external devices such as IR sensors, switches, and alarm relays.
This got me thinking. Most of the setups discussed here and on the homeseer website use wireless tech such as Z-wave or rfxcom to communicate presence, motion detection, the opening of doors, pushing of switches etc. to homeseer. This makes sense in a situation where any cabling would be installed later, but in our recent remodeling I installed 50mm ducts in walls and ceilings to almost everyplace where I might conceivably run a cable. I prefer hardwired solutions to wireless any day, because I expect them to be more reliable and less costly. To get to the point: I'm looking for an i/o board that works with Homeseer, so that traditional motion sensors and such can be hardwired to the server closet where homeseer lives. Preferably with USB so I don't have to kludge a USB-serial converter in, most low-power systems don't have com-ports nowadays. I'm not too comfortable with a soldering iron or learning a new programming language at this stage.
So far I've found the Digibee which works with Jon00's plugin, and this pricey interface from Homeseer:
Any suggestions?
TIA,
Art
I/o module for homeseer?
Moderator: Ruud
Re: I/o module for homeseer?
Ik doe het even in het nederlands gezien het hier mag
Ik heb mijn input/outputs en 1 wire temperatuursensoren via een CAI Webcontrol PLC IP-Interface draaien(2stuks). Het draait onder een Xap plugin van Michael McSharry genaamd, xapmcsWebControl.
Ik heb zelf de inputs via een optocoupler lopen naar de webcontrol en de uitgangen naar een 16 kanaals relaibordje. (wel wat soldeerwerk...)
Hier wat links met info.
Webcontrol IP interface :http://cainetworks.com/products/webcontrol/web ... l-faq.html
Plugin homeseer : http://board.homeseer.com/showthread.php?t=138892
Succes
Ik heb mijn input/outputs en 1 wire temperatuursensoren via een CAI Webcontrol PLC IP-Interface draaien(2stuks). Het draait onder een Xap plugin van Michael McSharry genaamd, xapmcsWebControl.
Ik heb zelf de inputs via een optocoupler lopen naar de webcontrol en de uitgangen naar een 16 kanaals relaibordje. (wel wat soldeerwerk...)
Hier wat links met info.
Webcontrol IP interface :http://cainetworks.com/products/webcontrol/web ... l-faq.html
Plugin homeseer : http://board.homeseer.com/showthread.php?t=138892
Succes
Re: I/o module for homeseer?
K8061 van Velleman.
Werkt goed met de plugin die speciaal voor Homeseer gemaakt is.
http://www.maikelwijnen.com/pr_homeseer_vm140.php
Werkt goed met de plugin die speciaal voor Homeseer gemaakt is.
http://www.maikelwijnen.com/pr_homeseer_vm140.php
Re: I/o module for homeseer?
k8061 heb ik er een aantal van werkt perfect
Re: I/o module for homeseer?
Bedankt heren! Daar kan ik wat mee.
Re: I/o module for homeseer?
heeft iemand de K8061 lopen via Lan?? ik kan geen usb kabel leggen naar waar ik de K8061 wil plaatsen.
heeft iemand ervaring een usb to lan converter daarvoor te gebruiken?
heeft iemand ervaring een usb to lan converter daarvoor te gebruiken?
Ralph
Re: I/o module for homeseer?
Ik zou in dat geval een RaspberryPI proberen
http://www.youtube.com/watch?v=8X6PgYaegz0
Of de LAN versie van Velleman kopen maar die is behoorlijk prijzig
http://www.vellemanusa.com/products/view/?id=526331
http://www.youtube.com/watch?v=8X6PgYaegz0
Of de LAN versie van Velleman kopen maar die is behoorlijk prijzig
http://www.vellemanusa.com/products/view/?id=526331
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
Re: I/o module for homeseer?
Of een Arduino Ethernet ?
HomeSeer - PlugWise - RFXComm - Philips Pronto TSU9800/9600/9300
Re: I/o module for homeseer?
DigiBee --> USB --> Belkin USB/Ethernet --> eigenbouw Visual basic interface --> Homeseer
Stabiel en super tevreden
Stabiel en super tevreden
Francois
Re: I/o module for homeseer?
USB over UTP. Werkt hier goed met een USB webcam over 30 meter Cat5e.