I'm getting the same "getty: applet not found" error when the Toon is booting. Looks like i've done something wrong with adding the line to /etc/inittab.iMars wrote:Ok, done everything till the moment you have to reboot...
Instead of that, I've read that you can also use the reset button...
I get this:I've got bootloader: U-Boot 2010.09-R8, so that works fine...Code: Select all
usb 2-1: SerialNumber: 00e04c000001 (print_boot_msg) Please wait: booting... (print_boot_msg) * Kernel 2.6.36-R10-h27 (print_boot_msg) * Firmware qb2/ene/4.10.6-1196-0 (print_boot_msg) * Hostname eneco-001-016676 (print_boot_msg) ==DriverVersion: v2.6.6.0.20120405== MAC Address from efuse= 6c-71-d9-3c-42-48 usbcore: registered new interface driver r871x_usb_drv usbcore: registered new interface driver rt2870 Loading iptables settings: iptables. (print_boot_msg) Configuring network interfaces... (print_boot_msg) Configuring network interfaces... Running 'ifup -a' in the foreground (ifup-fg) ifup: interface lo already configured eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1:10, irq=-1) udhcpc: started, v1.27.2 udhcpc: sending discover udhcpc: sending discover udhcpc: sending discover Lease failing, starting in bg: udhcpc -b -R -i eth0 -A 5 -p /var/run/udhcpc.eth0.pid -H eneco-001-016676 udhcpc: option -h NAME is deprecated, use -x hostname:NAME udhcpc: started, v1.27.2 udhcpc: no lease, failing udhcpc: sending discover Successfully initialized wpa_supplicant rfkill: Cannot get wiphy information ioctl[SIOCSIWAP]: Operation not permitted udhcpc: sending discover udhcpc: started, v1.27.2 udhcpc: sending discover udhcpc: sending discover udhcpc: sending discover Lease failing, already running in bg: udhcpc -b -R -i eth0 -A 5 -p /var/run/udhcpc.eth0.pid -H eneco-001-016676 udhcpc: no lease, forking to background Lease failing, starting in bg: udhcpc -b -R -i wlan0 -A 5 -p /var/run/udhcpc.wlan0.pid -H eneco-001-016676 udhcpc: no lease, failing udhcpc: option -h NAME is deprecated, use -x hostname:NAME udhcpc: started, v1.27.2 * Wired (eth0) 00:0f:11:01:f6:0f [No IP from DHCP Server] (print_boot_msg) udhcpc: sending discover * Wireless (wlan0) 6c:71:d9:3c:42:48 [No IP from DHCP Server] (print_boot_msg) Setting up IP spoofing protection: rp_filter. udhcpc: sending select for 10.0.0.110 udhcpc: lease of 10.0.0.110 obtained, lease time 600 /etc/udhcpc.d/50default: Adding DNS 10.0.0.1 /etc/udhcpc.d/50default: Adding DNS 84.116.46.21 INIT: Entering runlevel: 5dding /etc/udhcpc.d/70prepend-google-pub-dns: Prepending DNS 8.8.8.8 (skip with /mnt/persist/udhcpc-skip-prepend-google-pub-dns) Starting syslogd/klogd: done HCBv2 apps started via runlevels, performing 'addstartables && reload && init 5 or 5'. HCBv2 adding: comm eventmgr kpi pwrusage scsync smartplug thermstat usermsg weather bxtproxy config log rrd watchdog hue p1 zwave lighttpd. HCBv2 startables unchanged, not writing /etc/inittab. getty: applet not found getty: applet not found getty: applet not found getty: applet not found imx-fb imx-fb.0: PreserveUBootFramebuffer(4): xres=800, yres=480 [do _update_lcdc] getty: applet not found getty: applet not found getty: applet not found getty: applet not found getty: applet not found getty: applet not found INIT: Id "gett" respawning too fast: disabled for 5 minutes r8711_wx_set_scan: IW_SCAN_THIS_ESSID, ssid=iRouter, len=7 getty: applet not found getty: applet not found getty: applet not found getty: applet not found getty: applet not found getty: applet not found getty: applet not found getty: applet not found getty: applet not found getty: applet not found INIT: Id "gett" respawning too fast: disabled for 5 minutes
But now I can only get into U-Boot and not in any shell-environment to edit the /etc/initab again. Any suggestions? Read something about single mode, but not sure what to do.