Page 3 of 4
Re: warmwater on toon
Posted: Sun Oct 06, 2019 8:55 pm
by TheHogNL
glsf91 wrote:TheHogNL wrote:
Is your modification in the TSC menu already available for everyone or is it still beta ?
(because I don't see these option)
And do you know if it is possible to switch on/off "Kraanwater voorverwarmen" with a URL ?
If you don't see this option your Toon isn't on opentherm OR your boiler doesn't talk to the Toon that it support this feature.
But then you also don't have the native button from the Toon itself (menu 'verwarming') to disable the whole pre-heating.
And no, there is no out-of-the-box url to disable preheating. But with a rooted toon everything is possible to make it your self
Re: warmwater on toon
Posted: Sun Oct 06, 2019 9:06 pm
by glsf91
TheHogNL wrote:
If you don't see this option your Toon isn't on opentherm OR your boiler doesn't talk to the Toon that it support this feature.
But then you also don't have the native button from the Toon itself (menu 'verwarming') to disable the whole pre-heating.
I think you mean menu "warm water"instead of "Verwarming".
I have opentherm and also menu "warm water" with the option "Kraanwater voorverwarmen".
Or do I have to set the togle FT_Dhw_rel first ?
Re: warmwater on toon
Posted: Sun Oct 06, 2019 10:49 pm
by TheHogNL
glsf91 wrote:
I think you mean menu "warm water"instead of "Verwarming".
I have opentherm and also menu "warm water" with the option "Kraanwater voorverwarmen".
Or do I have to set the togle FT_Dhw_rel first ?
Correct. Menu "warm water".
But no that toggle is for something else. The button is dependend on FF_Dhw_PreHeat_Settings (see
https://github.com/ToonSoftwareCollecti ... e.qml#L321) which is automatically set (by happ_thermstat) when you have opentherm and a boiler supporting it. But it is weird that in your setup you do have the native buttons but not this TSC option.
Can you post the output of the first 10 to 20 seconds of
Code: Select all
/qmf/sbin/happ_thermstat -vvv 2>&1 | grep -i dhw
Just hit ctrl-c to end it. Your happ_thermstat will not work after this but will be restarted in 5 minutes. Or just reboot.
I'm looking at the feature toggle and flags in the first few lines of that output.
Re: warmwater on toon
Posted: Mon Oct 07, 2019 7:11 pm
by glsf91
TheHogNL wrote:glsf91 wrote:
Can you post the output of the first 10 to 20 seconds of
Code: Select all
/qmf/sbin/happ_thermstat -vvv 2>&1 | grep -i dhw
Just hit ctrl-c to end it. Your happ_thermstat will not work after this but will be restarted in 5 minutes. Or just reboot.
I'm looking at the feature toggle and flags in the first few lines of that output.
Code: Select all
eneco-001-130337:~# /qmf/sbin/happ_thermstat -vvv 2>&1 | grep -i dhw
[hdrv]Adding driver handler Thermostat'7'GetDhwSettings
[hdrv]Adding driver handler Thermostat'7'SetDhwSettings
[hbas]Config '<happ_thermstat>dhwEnabled' not found, using default '1'
[hbas]Config '<happ_thermstat>dhwSetpoint' not found, using default '60'
[hbas]Config '<releaseToggles>FT_Dhw_rel' is '0'
[happ_thermstat:../../src/feature.c@feature_toggleUpdate():418]Toggle FT_Dhw_rel changed to 0
[happ_thermstat:../../src/feature.c@feature_eval():455]Feature FF_Dhw_UiElements_Settings result: 0
[happ_thermstat:../../src/feature.c@feature_eval():455]Feature FF_Dhw_UiElements_Settings result: 0
[happ_thermstat:../../src/feature.c@feature_eval():455]Feature FF_Dhw_PreHeat_Settings result: 1
[happ_thermstat:../../src/feature.c@feature_eval():455]Feature FF_Dhw_UiElements result: 0
[happ_thermstat:../../src/master.c@createSvar_int():211]Adding profile ThermostatInfo var BoilerDhwBurnerHours
[happ_thermstat:../../src/master.c@createSvar_int():211]Adding profile ThermostatInfo var BoilerDhwBurnerStarts
[happ_thermstat:../../src/rrd.c@rrd_initDevicesByIntAddr():472]Checking key=thermstat_boilerDhwBurnerHours devUuid=58556841-fc66-45a8-a382-6646a9493ecb
[happ_thermstat:../../src/rrd.c@rrd_initDevicesByIntAddr():472]Checking key=thermstat_dhwBurnerStarts devUuid=58556841-fc66-45a8-a382-6646a9493ecb
[happ_thermstat]rrd init rrdName:thermstat_boilerDhwBurnerHours uuid:4fc93aa9-96e0-426d-b50b-eb7126d95dc0 deviceUuid:58556841-fc66-45a8-a382-6646a9493ecb
[happ_thermstat]rrd init rrdName:thermstat_dhwBurnerStarts uuid:0d6dd188-4694-4791-b892-55fe1a5348c6 deviceUuid:58556841-fc66-45a8-a382-6646a9493ecb
[happ_thermstat:../../src/feature.c@feature_eval():455]Feature FF_Dhw_UiElements_Settings result: 0
[happ_thermstat:../../src/feature.c@feature_eval():455]Feature FF_Dhw_UiElements result: 0
[happ_thermstat]OTGW <<- 'M' 02 01 38 3C 00 Set DHW setpoint to 60
[hcom]Sending HBXT_ACTION_INVOKE from eneco-001-130337:happ_thermstat to eneco-001-130337:hcb_log/Logger: n=LogMessage facility=1 timestampGenerated=2019-10-07 18:58:23 +0200 timestampExpire=2019-11-06 17:58:23 +0100 categoryId=90 entryType=2 appId=1000 objectType=8 objectId=happ_thermstat logText=thermstat_boilerDhwSetpoint=60 logTextF=
[happ_thermstat]OTGW setup step 14/16: set DHW temp
^C
I hope this is what you are looking for.
Re: warmwater on toon
Posted: Mon Oct 07, 2019 9:37 pm
by TheHogNL
glsf91 wrote:
I hope this is what you are looking for.
Yes thanks.
This show that it is set correctly: Feature FF_Dhw_PreHeat_Settings result: 1
Can you send a picture of the TSC menu where the water preheat option is missing?
Re: warmwater on toon
Posted: Mon Oct 07, 2019 9:55 pm
by glsf91
TheHogNL wrote:glsf91 wrote:
I hope this is what you are looking for.
Yes thanks.
This show that it is set correctly: Feature FF_Dhw_PreHeat_Settings result: 1
Can you send a picture of the TSC menu where the water preheat option is missing?
Of course.
drive.google.com/open?id=1ew-fIRZj-quTc ... PNaWMoXTOR
Re: warmwater on toon
Posted: Mon Oct 07, 2019 10:00 pm
by TheHogNL
Owh you are on an old version
just hit check update and let it update your toon and or resource files
Re: warmwater on toon
Posted: Mon Oct 07, 2019 10:07 pm
by glsf91
TheHogNL wrote:Owh you are on an old version
just hit check update and let it update your toon and or resource files
I updated the resource file earlier this week.
So I have to update firmware to 5.3.12?
Re: warmwater on toon
Posted: Mon Oct 07, 2019 10:17 pm
by TheHogNL
On what firmware are you running now? TSC menu 2.1.0 should be available on most recent firmwares (everything 5.x ). And yes, just update to 5.13.12 if you have an older firmware.
Re: warmwater on toon
Posted: Mon Oct 07, 2019 10:21 pm
by glsf91
TheHogNL wrote:On what firmware are you running now? TSC menu 2.1.0 should be available on most recent firmwares (everything 5.x ). And yes, just update to 5.13.12 if you have an older firmware.
I have now 4.9.10
Re: warmwater on toon
Posted: Mon Oct 07, 2019 10:24 pm
by mAiden
glsf91 wrote:TheHogNL wrote:On what firmware are you running now? TSC menu 2.1.0 should be available on most recent firmwares (everything 5.x ). And yes, just update to 5.13.12 if you have an older firmware.
I have now 4.9.10
Hit the button "Check for update". What say it?
Re: warmwater on toon
Posted: Mon Oct 07, 2019 10:34 pm
by glsf91
mAiden wrote:glsf91 wrote:TheHogNL wrote:On what firmware are you running now? TSC menu 2.1.0 should be available on most recent firmwares (everything 5.x ). And yes, just update to 5.13.12 if you have an older firmware.
I have now 4.9.10
Hit the button "Check for update". What say it?
Only firmware update to 5.3.12.
Re: warmwater on toon
Posted: Mon Oct 07, 2019 11:33 pm
by TheHogNL
Yes just update. TSC 2.1.0 is not available for pre 5.x firmwares.
Re: warmwater on toon
Posted: Tue Oct 08, 2019 11:43 am
by mAiden
glsf91 wrote:
Only firmware update to 5.3.12.
Exactly what TheHogNL said .. You will really have to update to 5.13.12, otherwise you will never get TSC 2.1.0, this only works from 5.x.x firmwares.
Update your Toon. You will have the new TSC menu.
Re: warmwater on toon
Posted: Tue Oct 08, 2019 9:32 pm
by glsf91
TheHogNL wrote:Yes just update. TSC 2.1.0 is not available for pre 5.x firmwares.
Update succeeded and indeed visible now. Thanks.
Small question: what is Lock TSC settings?
And if I change something in qmf_release.xml do I have to reboot or just restart GUI?