Page 1 of 2
Oregon scientific WTGR 800
Posted: Sat May 10, 2008 6:39 pm
by Harry
is deze compatible met de RFXCOM reciever
http://www.oregonscientific.be/nl_prod_ ... prodid=456#
kan ik met deze sensor de windgegevens in de homeseer charts loggen ?
Oregon scientific WTGR 800
Posted: Sat May 10, 2008 6:58 pm
by b_weijenberg
Yes, the WTGR800 can be received and can be displayed on the RFXWeather chart.
For the complete list of supported Oregon Scientific sensor see:
http://www.rfxcom.com/hsrfxcom.htm
Oregon scientific WTGR 800
Posted: Sat May 10, 2008 8:14 pm
by Snelvuur
didn't know that one yet, it looks more robust then other single devices.
// Erik (binkey.nl)
Oregon scientific WTGR 800
Posted: Wed May 28, 2008 9:21 am
by Bastiaan
Best place to buy this one in NL?
Oregon scientific WTGR 800
Posted: Wed May 28, 2008 6:12 pm
by Snelvuur
You can get that one with a weather station normally i think..
I also saw this one at
http://www.hetweerinbleiswijk.nl/apparatuur which they used a small linux device to collect the data and such, pretty nice setup.
anyway a quick look on google
http://www.klokkenfabriek.nl/index2.php ... =produkten , but this is a total set i think.
// Erik (binkey.nl)
Oregon scientific WTGR 800
Posted: Thu Jun 05, 2008 1:25 pm
by Bastiaan
Checked with Futurumshop.nl if they were able to get it for me but they couldn't.
Mailed Oregon for local resellers but no answer....
Oregon scientific WTGR 800
Posted: Mon Jun 16, 2008 8:14 pm
by Wima
http://www.vitalitools.nl/nl/oregon_sci ... .php?btw=1
-------------------------------
Even the genious ask questions.
Oregon scientific WTGR 800
Posted: Mon Jun 16, 2008 9:41 pm
by Bastiaan
Did you ask info from them? If so can you post their reply?
Bastiaan
Oregon scientific WTGR 800
Posted: Tue Jun 17, 2008 7:36 pm
by Bastiaan
Ok I got the last one from vitalitools but they will have more in the coming days.
Very nice contact/service!
Oregon scientific WTGR 800
Posted: Sun Jun 22, 2008 12:36 pm
by Bastiaan
Got my unit on the roof but my wind speed reading is not working. Everything else works fine.
I have placed the wind 'rotor' on top of the unit but is seems very loose. Can anybody with the WTGR800 confirm that this is normal? I don't need to push it down on a lock or so? It all seems pretty fragile.
Thanks, Bastiaan
Oregon scientific WTGR 800
Posted: Sun Jun 22, 2008 1:54 pm
by Wima
You just remove the silicon protection (for the rain) then losen the screw, put the wind rotor back on top and fasten the screw again, then place back the silicon protection. The rotor turns without friction, because the readings are transmit by 2 magnets. The screw protects the rotor from blown of of the meter. I think in your case the magnets are not close enough to the meter itself.
Wil
-------------------------------
Even the genious ask questions.
Oregon scientific WTGR 800
Posted: Sun Jun 22, 2008 2:18 pm
by Bastiaan
Thanks! Exactly what I needed to know
works fine now.
Oregon scientific WTGR 800
Posted: Fri Mar 20, 2009 12:02 am
by Harry
i don't get an signal from the divice,olso try'd the rfxmonitor. recieve nothing.do i need to do extra things.
Oregon scientific WTGR 800
Posted: Fri Mar 20, 2009 10:46 am
by b_weijenberg
batteries in the sensor
reset of the sensor does not help?
Enable All RF protocols in the receiver to be sure that the Oregon protocol is enabled.
Does your receiver version already support the Oregon 3.0 protocol?
Oregon scientific WTGR 800
Posted: Fri Mar 20, 2009 10:59 am
by RDNZL
The girls/guys from vitalitools also ship very fast, ordered a PCR800 rain sensor this week, next day at the door!
Regards,