Home Automation Domotica Forum Europe, Bwired Forum

warp wrote: This folder is almost empty.
Here is what I have :

Code: Select all

eneco-001-xxxxxx:/qmf/qml# ls -alh
drwxrwxr-x    5 root     root        1016 Sep 29 20:33 .
drwxrwxr-x   11 root     root         992 May 26 17:40 ..
drwxrwxr-x   36 root     root        3.0K Sep 27 20:47 apps
drwxr-xr-x    2 root     root         312 Sep 29 20:33 config
-rw-r--r--    1 root     root        6.2M Jun 19 08:55 drawables-base.rcc
-rw-r--r--    1 root     root        7.7M Jun 19 08:55 drawables-ebl.rcc
lrwxrwxrwx    1 root     root          27 Sep 11 13:29 drawables.rcc -> /qmf/qml/drawables-base.rcc
drwxr-xr-x    3 root     root         224 Jun 19 08:55 qb
-rw-r--r--    1 root     root        1.4M Sep 29 20:33 resources-static-base.rcc
-rw-r--r--    1 root     root        1.4M Sep 27 20:47 resources-static-base.rcc.backup
-rw-r--r--    1 root     root        1.4M Sep 29 20:33 resources-static-ebl.rcc
-rw-r--r--    1 root     root        1.4M Sep 27 20:47 resources-static-ebl.rcc.backup
lrwxrwxrwx    1 root     root          34 Sep 11 13:29 resources.rcc -> /qmf/qml/resources-static-base.rcc
eneco-001-xxxxxx:/qmf/qml#

TheHogNL wrote:Can you post your scsync file (with the feature configured)?

eneco-001-xxxxxx:~# cat /HCBv2/config/config_happ_scsync.xml

 <Config packageRevision="443">
  <sysConfig>
   <locale>fr_BE</locale>
   <timezone>Europe/Amsterdam</timezone>
   <currency>EUR</currency></sysConfig>
    <device>
     <package>happ_scsync</package>
     <uuid>xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx</uuid>
     <type>agreementDetail</type>
     <internalAddress>agreementDetail</internalAddress>
     <visibility>1</visibility><StartDate>0</StartDate><EndDate>-1</EndDate><ProductVariant>Toon</ProductVariant><activated>1</activated><wizardDone>1</wizardDone><ElectricityDisplay>1</ElectricityDisplay><GasDisplay>1</GasDisplay><HeatDisplay>0</HeatDisplay><SolarDisplay>0</SolarDisplay><SolarActivated>0</SolarActivated><OtherProviderElec>0</OtherProviderElec><OtherProviderGas>0</OtherProviderGas><SME>0</SME><HeatWinner>0</HeatWinner><mobileAccess>1</mobileAccess><supportEnabled>0</supportEnabled><supportEnabledStart>0</supportEnabledStart><researchEnabled>0</researchEnabled><doSolarWhatsnew>0</doSolarWhatsnew><latestWhatsnewVersion>qt-gui - 1.9638-release-5.9</latestWhatsnewVersion><statusUsageFirstUse>0</statusUsageFirstUse><scStatusFlags>0</scStatusFlags><commissionState>0</commissionState><features>boilerMonitoring</features><featureInputs></featureInputs></device>
    <device>
     <serial_number>15-27-021-674</serial_number>
     <device_type>Display</device_type>
     <device_model>6500-1500-0000</device_model>
     <hardware_version>6500-1500-0000</hardware_version>
     <manufacturer>Prodrive</manufacturer>
     <devicePackage>hcb_config</devicePackage>
     <package>happ_scsync</package>
     <uuid>abf54c25-b431-42e7-a542-e518c7d5750c</uuid>
     <type>deviceInfo</type>
     <name>deviceInfo</name>
     <internalAddress>hcb_config</internalAddress>
     <visibility>1</visibility></device>
    <device>
     <serial_number>15-26-009-259</serial_number>
     <device_type>MeterAdapter</device_type>
     <device_model>6500-1300-7200</device_model>
     <hardware_version>6500-1300-7200</hardware_version>
     <manufacturer>Prodrive</manufacturer>
     <devicePackage>hdrv_p1</devicePackage>
     <devUuid>d5b1a015-a271-448b-9377-390c0424a09a</devUuid>
     <package>happ_scsync</package>
     <uuid>3ae9878b-a6e3-431e-8738-f4547e717a11</uuid>
     <type>deviceInfo</type>
     <name>deviceInfo</name>
     <internalAddress>15-26-009-259</internalAddress>
     <visibility>1</visibility></device>

    <device>
     <serial_number>15-18-033-626</serial_number>
     <device_type>BoilerAdapter</device_type>
     <device_model>6500-1200-4801</device_model>
     <hardware_version>6500-1200-4801</hardware_version>
     <manufacturer>Prodrive</manufacturer>
     <devicePackage>happ_thermstat</devicePackage>
     <package>happ_scsync</package>
     <uuid>51b7f1c8-f9e9-4824-886c-cda5ef6555cb</uuid>
     <type>deviceInfo</type>
     <name>deviceInfo</name>
     <internalAddress>15-18-033-626</internalAddress>
     <visibility>1</visibility></device></Config>eneco-001-151219:~#

warp wrote: Here it is :
It's inside feature (without "s"), don't know if it's a typo from you.
For info : I never edited or replaced this file, except for the language. (and except now obviously)

TheHogNL wrote:

warp wrote: Here it is :
It's inside feature (without "s"), don't know if it's a typo from you.
For info : I never edited or replaced this file, except for the language. (and except now obviously)

This file gets reset every time you connect the Toon to Eneco's servers and also after a factory reset.

But you need to put in <feature>boilerMonitoring</feature> BETWEEN <features></features>
So it becomes: <features><feature>boilerMonitoring</feature></features>
(there are more features...)

warp wrote:

TheHogNL wrote:

warp wrote: Here it is :
It's inside feature (without "s"), don't know if it's a typo from you.
For info : I never edited or replaced this file, except for the language. (and except now obviously)

This file gets reset every time you connect the Toon to Eneco's servers and also after a factory reset.

But you need to put in <feature>boilerMonitoring</feature> BETWEEN <features></features>
So it becomes: <features><feature>boilerMonitoring</feature></features>
(there are more features...)

Indeed now it’s there. Useless, but it’s there.
Could it be that the language modification I did in the scsync file is the reason why the tsc menu was not able to add the app ?

TheHogNL wrote:duh, i feel so stupid right now..
the comments in the code was wrong. I used # instead of // to make a commented line and did only put it there in the post and not on my own Toon

So change the # in // and it works.

Code: Select all

        function show(expanded) {
//mod to remove network errors in notification bar
                notifications.removeByTypeSubType("error","network");
//end mod
                if (notifications.count === 0 || blockConditions)

Rick083 wrote:

TheHogNL wrote:duh, i feel so stupid right now..
the comments in the code was wrong. I used # instead of // to make a commented line and did only put it there in the post and not on my own Toon

So change the # in // and it works.

Code: Select all

        function show(expanded) {
//mod to remove network errors in notification bar
                notifications.removeByTypeSubType("error","network");
//end mod
                if (notifications.count === 0 || blockConditions)

I could use some help; Adjusted the notificationbar file as above; Still after reboot my Toon is hanging on a white screen; More serious, even if i return the file to its original state ( SSH still working ) the Toon doesn't start up: still hanging on a white screen; Now i've got a none functional Toon; i need some help to get it working again...

Rick083 wrote:My current firmware is 4.13.7. Until now there was no reason to update the Toon ( If it ain't broken, don't touch it, i ) only those irritating network notifications.
Is there a limit or advise to which firmware i can update from 4.13.7 ? I also noticed that now its only possible to connect Toon by wifi; The ethernet port is not responding:
Will this be a problem during the update ? Further question: Is there a certain directory from where the curl command has to be started ?

Thanks for your input so far.

TheHogNL wrote:

Rick083 wrote:My current firmware is 4.13.7. Until now there was no reason to update the Toon ( If it ain't broken, don't touch it, i ) only those irritating network notifications.
Is there a limit or advise to which firmware i can update from 4.13.7 ? I also noticed that now its only possible to connect Toon by wifi; The ethernet port is not responding:
Will this be a problem during the update ? Further question: Is there a certain directory from where the curl command has to be started ?

Thanks for your input so far.

Just start the script anywhere you like. Most just put it in /root. Then it will guide you to which firmware you can update. Most just update to 5.33.9 (newest now).
Ethernet port isn't used.

madpatrick wrote:Hi,

I've lately some responce problems with my Toon2.
The screen is responding slow on every command. A restarts help for a few days, but then it is slow again.
Is it possible to revert back to a previous firmware version to check if this is a problem of a recent update ?