Home Automation Domotica Forum Europe, Bwired Forum

De RFXtrx433E instellingen bij gebruik van Ext of Ext firmware is geen probleem met deze specs: "More than 1 Million Erase/Write Cycles" Bij gebruik van Type1 of Type2 firmware is het gelimiteerd tot ongeveer 10.000 Erase/Write Cycles. Bij handmatig aanpassen van instellingen levert het in...

je kunt de RFXtrx433 niet configureren op de Transmitter config pagina! Configureer de RFXtrx433 op de RFXtrx/RFXrec config pagina. Selecteer alleen de protocollen die je voor ontvangst nodig hebt en niet alles. Zie hfdstk 2.4 in de RFXtrx User Guide welke protocollen elkaar kunnen verstoren. Voor z...

It seems to be possible using Domoticz on a RPI.
https://www.domoticz.com/forum/viewtopic.php?t=9846

this should be solved in version 1004 which is on the download page now.

Als je nog een plafondventilator aan moet schaffen zou je een Lucci Air kunnen nemen met 3 snelheden.
http://www.ventilatorwereld.nl/nl/tags/lucci-air/

Deze kan je in de volgende versie van de HS3 RFXCOM plugin en de RFXtrx433E dan aansturen.

Create an AC device on the Switches page, select a random ID and pair this with the ASUN-650?

Please check chapter 2.2.2 in the RFXtrx User Guide for the list of supported sensors.
Denver is not in this list and therefore not sure this sensor is supported.

The RFXtrx433E can easily be transformed to a LAN version. Use a RaspberryPI and install ser2net. Disable Serial Console ====================== sudo nano /etc/inittab insert a # sign in front of this line: T0:23:respawn:/sbin/getty -L ttyAMA0 115200 vt100 ctrl-O Enter ctrl-x Remove console =========...

please send a screen copy of the HS2 and HS3 device config to support

Configure C6 also on the RFXCOM tab of the device.

with device type ARC or AC?
If AC use the correct Unit code.

There is an import utility for RFXCOM devices from HS2 to HS3.

An MS13 is a X10 device and must be added by hand on the Homeseer main page.
Select STATUS ONLY for the house code used by the MS13 on the RFXCOM General config page.

This problem is produced by the BTHGN129 which you have in use.
I have sent you an updated plugin.

C:\Program Files (x86)\HomeSeer HS3\Data

Jos,

The RFXtrx433 is equiped with an FTDI USB controller and the device is recognized as USBx.
Check this for other USB controllers and adjust the other parameters like baud rate.

I suppose you can use http://www.eterlogic.com/Products.VSPE.html