BWR102 offset...

Post by **RdP** » Sun Mar 29, 2009 7:50 pm

Hi,

We are using the BWR102 for a while now, but it's measurements are very poor...

If I try to measure my weight and do this 10 times in a row, I get lot's of different measurements with an offset of 1 kg.

Do you also experience this ??

Thanks,

Post by **Antoon** » Sun Mar 29, 2009 8:03 pm

No problems here with the BWR102.
10 times is giving the same result.

- Antoon

<h6>

Post by **Bwired** » Sun Mar 29, 2009 8:17 pm

Same here, do you use a solid underground?

Post by **simjoc** » Sun Mar 29, 2009 11:48 pm

When using the BWR102 in the living room I'm 2.0 kg heavier then in the bathroom.

Post by **Snelvuur** » Mon Mar 30, 2009 2:27 am

the further you are away from the center point of the earth, the lighter you are. So you must way less in the 30th floor then on the ground floor.. (in theory that is)

// Erik (binkey.nl)

Post by **Mdamen** » Mon Mar 30, 2009 7:56 am

I would use it in the bathroom then [:)]
Btw.. I don't have that problem with the BWR102..

--
Maarten Damen

www.maartendamen.com

Post by **Jeroen Bartels** » Mon Mar 30, 2009 12:54 pm

May scale always has an offset of 12 kg.....(higher that is

I went to the shop who sold it to me and he told me to loose weight..

Jeroen

Post by **Snelvuur** » Mon Mar 30, 2009 1:00 pm

As long as you stand on it and it does not say "1 at a time please" you should be ok

// Erik (binkey.nl)

Post by **Jfn** » Mon Mar 30, 2009 1:02 pm

I believe only one of the 4 feet that the scale is standing is is actually being used to measure your weight.

So if you are standing on the scale a little off-center the measured weight may vary also.

And for those where the scale is displaying weights that are way too high, consider mounting an electronic lock on the freezer so that it only opens when your weight is below a certain value ...